Hydraulic Power Steering Rack And Pinion Assembly For 98-02 Accord 2.3L 26-1791

  
Steering gear, also called steering gear, is the most important part of automobile steering system. Power steering (PAS) or steering assist system helps drivers steer by augmenting steering effort of the steering wheel. Power steering rack and pinion is the most important part for vehicle swerving and security assurance. It converts the rotational motion of the steering wheel into the linear motion needed to turn the wheels and provides a gear reduction.

Thus making it easier to turn the wheels. Also called steering gear, is the most important part of automobile steering system. Or steering assist system helps drivers steer by augmenting steering effort of the steering wheel.

Power steering rack and pinion. Is the most important part for vehicle swerving and security assurance. Casting Material : Steel/Aluminum Package Contents : Rack and Pinion, Installation Kit, Instruction Sheet Product Condition : Remanufactured Number of Mounting Holes : 2 Hose Port Type : O-Ring Tie Rod Ends Included : Inner Total Turns Lock To Lock : 3 Pressure Port Thread Size : M14 x 1.5 Return Port Thread Size : M16 x 1.5 Rack Length (mm) : 1057.28 Thread Length (In) : 1.77 Thread Length (mm) : 44.86 Distance Between Mounting Holes (in) : 4.25 Distance Between Mounting Holes (mm) : 107.95 Steering Rack Color : Black Input Shaft Diameter (in) : 0.75 Input Shaft Diameter (mm) : 19.05 Input Shaft Length (in) : 1.81 Input Shaft Length (mm) : 46.05 Rack Length (in) : 41.63. Compatible with the following vehicles.

4 CYL SEDAN MODELS ONLY. In order to ensure the normal operation of the steering gear, relevant parts shall be cleaned as much as possible before installation.

In order to avoid the fault caused by the dirt entering the steering oil circuit, the plug on each oil port of steering pump of steering gear shall be opened before connecting the oil pipe, and the oil pipe and plug shall be carefully cleaned and deburred. Turn the steering wheel to the straight ahead position. Clean the mounting bracket of the steering gear and relevant mating surfaces of the steering gear.

For the adjustable steering column, use a suitable rope to pass through the space of the cross fork of the steering shaft, hang the steering shaft, and connect the steering shaft and the input shaft of the steering gear. Turn the steering gear to the middle position to align the relevant marks at the input end and output end of the steering gear. Install the steering gear on the mounting base and tighten the fixing bolts. Universal joint or coupling between mounting column and steering gear.

For the adjustable steering column, the upper end seal of the steering gear shall not be damaged when the universal joint is installed. Keep the steering wheel in straight ahead position.

Put the pitman arm on the steering gear to align the two marks. Tighten the locknut according to the specified torque and rivet (anti loose pit).

Rack & Pinion Complete Unit, Steering Rack, Steering Gear. Backed by satisfying after-sales service. Rotate quickly and normal position. 26-1791, Rack 25521,50-25521,19320604. Rack replacement kit, rack and pinion, power rack parts. Power Steering Rack, Steering Rack and Pinion. Rack and Pinion Assembly, Rack and Pinion Rack Gear. Top performance For long service life. HONDA ACCORD 2.3L 2000. The note there will NOT be read.

The images shown are not the actual item and are for your reference only. OR, you may choose to have a replacement. FEEDBACK IS VERY IMPORTANT TO US. Fit For P4594 12V 72Gph 5-9 Psi 1/4 NPSF New Electric Fuel Pump Module. For Chrysler Dodge Magnum 32x Front Rear Shocks Struts Assembly + Suspension Kit.

Starter For Polaris & Drive 300 Big Boss 250 Scrambler Sportsman 400 3085393. Starter For Chevy 2.2L S10 02 03 Monte Carlo 3.4L Venture Impala 2001-05 SDR0189.

New Starter For Ford Mercury Crown Victoria Lincoln Mark Series 4.6L SFD0028. 2 Front Hood Gas Lift Supports Shock Struts Props For Ford Explorer 2002 to 2010. UTV & ATV Brake System Parts.