Place an oil catch container under the power steering rack. Plug them to keep fluid from leaking.
After separating the steering wheel, move on to separating the outer tie-rod ends of the clamp from the knuckle. The cotter pins and nuts from the end of the tie rods are removed using an adjustable puller, fork, or hammer to remove the tie rod from the sleeve. Finally, by removing the mounting screws of the bracket and bushings, the rack-and-pinion is released. Mark the position of the brackets and bushings if the same rack assembly is mounted.
Due to its length, it is easiest to pull the rack-and-pinion assembly out through the vehicle's wheel well. The replacement of this accessory requires professional tools and correct replacement steps. It is recommended to go to a professional repair shop for replacement. We are not responsible for any wrong or undeliverable addresses. 2: Send product pictures: outer packaging & scanned label & item itself & complete accessories etc. Rule 1: Original packaging of unused items. Rule 2: The outer packing is intact. 3: Return the goods with the return label. Reasons in the following cases.1: Order error quantity, color, size, etc. 3: Change your mind, don't like or don't need this product anymore. Missing parts/quality problems/transportation damage, etc. It's highly appreciated you leave us.
Your comment is very important in our business success. We must give you a satisfactory solution. We will try our best to solve your problem.Because we believe Anything can be resolved through communication.