Power Steering Rack

Power Steering Rack and Pinion 26-2726 For Honda Ridgeline 2006-2014


Power Steering Rack and Pinion 26-2726 For Honda Ridgeline 2006-2014
Power Steering Rack and Pinion 26-2726 For Honda Ridgeline 2006-2014
Power Steering Rack and Pinion 26-2726 For Honda Ridgeline 2006-2014
Power Steering Rack and Pinion 26-2726 For Honda Ridgeline 2006-2014
Power Steering Rack and Pinion 26-2726 For Honda Ridgeline 2006-2014
Power Steering Rack and Pinion 26-2726 For Honda Ridgeline 2006-2014
Power Steering Rack and Pinion 26-2726 For Honda Ridgeline 2006-2014
Power Steering Rack and Pinion 26-2726 For Honda Ridgeline 2006-2014
Power Steering Rack and Pinion 26-2726 For Honda Ridgeline 2006-2014
Power Steering Rack and Pinion 26-2726 For Honda Ridgeline 2006-2014
Power Steering Rack and Pinion 26-2726 For Honda Ridgeline 2006-2014
Power Steering Rack and Pinion 26-2726 For Honda Ridgeline 2006-2014
Power Steering Rack and Pinion 26-2726 For Honda Ridgeline 2006-2014
Power Steering Rack and Pinion 26-2726 For Honda Ridgeline 2006-2014
Power Steering Rack and Pinion 26-2726 For Honda Ridgeline 2006-2014
Power Steering Rack and Pinion 26-2726 For Honda Ridgeline 2006-2014
Power Steering Rack and Pinion 26-2726 For Honda Ridgeline 2006-2014
Power Steering Rack and Pinion 26-2726 For Honda Ridgeline 2006-2014
Power Steering Rack and Pinion 26-2726 For Honda Ridgeline 2006-2014

Power Steering Rack and Pinion 26-2726 For Honda Ridgeline 2006-2014    Power Steering Rack and Pinion 26-2726 For Honda Ridgeline 2006-2014

1PC Power Steering Rack and Pinion For Chevy Silverado Sierra 1500 2WD 22-1000. 1pc Power Steering Rack 26-9008 for VW Golf Beetle Jetta 1J0422804H 1J1422062D. 1PC Power Steering Rack and Pinion For Honda Accord 2.4L Acura TL 3.2L 26-2703.

Power Steering Rack and Pinion 26-1822 32131140956 For BMW 318I 320I 325I Z3. Power Steering Rack and Pinion 26-1797 53601S84G04 For Honda Accord Acura CL. Input Shaft Diameter(in): 0.68in. Input Shaft Length(in): 1.82in. Pressure Port Thread Size: M161.5.

Return Port Thread Size: M161.5. Number of Mounting Holes: 2. Distance Between Mounting Holes (in): 3.94in. Rack Length (in): 53.08in. Built to strict quality control standards 100% factory tested.

The steering rack solves abnormal noise and oil leakage problems, ensures that the steering wheel rotation angle is proportional to the tire rotation angle, and reduces the steering wheel's control force when turning, which makes driving safer. Conversion of the steering wheel's rotationalmotion into the linear motion needed for thevehicle's wheels to turn.

Reduction of gears, which makes it easierfor the steering wheel to turn the wheels. With the premium aluminum alloy and steel construction, this steering rack assembly has a great anti-rust and anti-corrosive quality for its long service life. We put moderate lubricating oil into this assembly so that it can prevent rust and oxidation. Ensure a tight seal and smooth steering operation.

The hydraulic lines are fully fluid tested at high pressure. And the steel clamps and rubber bellow boots improve steering efficiency. 1PC Power Steering Rack and Pinion. Correctly select the model and size of the steering gear: The model and size of the steering gear must be consistent with the original parts of the vehicle, otherwise it will affect the steering sensitivity and stability. Clean the surrounding area first: Before replacing the steering gear, it is necessary to thoroughly clean the surrounding area to prevent small debris residues from damaging new steering gear components.

Correct disassembly and assembly of the steering gear: When disassembling an old steering gear, be particularly careful to avoid damaging the original vehicle components, and lubricate the bearings and gears during installation. Use of high-quality steering oil: For hydraulic power assisted steering machines, high-quality steering oil is required. Correctly adjust the wheel angle: After replacing the steering gear, it is necessary to adjust the wheel angle to ensure vehicle stability and safety. Attention to maintenance: Regularly inspect and maintain steering gear components to ensure good operation of the steering gear.

Oil leakage: The oil seal in the steering gear can break due to aging and wear, resulting in loss or leakage of hydraulic oil. Oil leakage can cause difficulty or malfunction in steering operation. Abnormal noise: A snap, noise, or hiss may be caused by worn steering gear, pin shaft, or rack. Excessive steering force: Blockage or wear of the steering gear oil pipes or passages can cause excessive hydraulic oil pressure, excessive steering force, or even steering failure.

Steering failure: Steering failure can be caused by reasons such as damage to the steering gear, blockage in the oil circuit, and failure of the oil pump, which will affect driving safety. Shake or shake: Worn or loose parts in the steering gear can easily cause the vehicle to shake or shake during steering. Dead center: When turning, if the steering wheel needs to be rotated for a long time until the vehicle turns significantly, this may be a dead center problem with the steering gear.

Full name, correct telephone number and detailed Physical Address (home or office address) but not PO Box/APO/FPO address are necessary. Please check the specification carefully to ensure you get what you want.

All items are in new and working condition unless specified otherwise elsewhere in the description. If you do not wish to wait for a replacement, please repurchase the item. We are happy to assist you! Please message us for further assistance.


Power Steering Rack and Pinion 26-2726 For Honda Ridgeline 2006-2014    Power Steering Rack and Pinion 26-2726 For Honda Ridgeline 2006-2014