Power Steering Rack And Pinion Assembly For 1985-1993 Ford Mustang Gt F6SZ3280BA

  

For a regular commuter car, the optimal form of steering is power steering. Power steering racks will have an extra component. The power steering pump, that will supply high-pressure fluid to rack, providing hydraulic power assist. This makes steering significantly easier for the driver.

Rack-and-pinion steering is quickly becoming the most common type of steering on cars, small trucks and SUVs. The rack-and-pinion gearset does two things. It converts the rotational motion of the steering wheel into the linear motion needed to turn the wheels. It provides a gear reduction, making it easier to turn the wheels. Distance Between Mounting Holes (IN) 15.50. Distance Between Mounting Holes (MM) 393.70. Input Shaft Diameter (IN) 0.73. Input Shaft Diameter (MM) 18.42. Input Shaft Length (IN) 2.00. Input Shaft Length (MM) 50.80.

Number of Mounting Holes 2. Rack Length (IN) 45.25. Rack Length (MM) 1149.35. Thread Length (IN) 2.75. Thread Length (MM) 69.85.

Tie Rod Ends Included Inner. Total Turns Lock To Lock 2.38.

How long does it take to install a power steering rack? Depending on the mechanic's experience, the installation should take about 3 hours. If you're planning on doing the work yourself, we suggest to put aside about 6 hours and take your time.

Labor costs will vary depending on the mechanic. Are power steering racks easy to install? It all comes down to how comfortable you are with working on your car. If you have little or no automotive knowledge or experience, we strongly recommend you take this to a certified mechanic to have the part properly installed and avoid possible failure or further damage to your vehicle. A bad installation can lead to much more costly repairs, so you should not risk it.

Do you include the tie rod ends with the steering racks? Some steering racks will come with the inner tie rod ends and/or outer tie rod ends.

Some steering racks will not, but we will always specify in the product description. All of our products come exactly as pictured.

In order to ensure the normal operation of the steering gear, relevant parts shall be cleaned as much as possible before installation. In order to avoid the fault caused by the dirt entering the steering oil circuit, the plug on each oil port of steering pump of steering gear shall be opened before connecting the oil pipe, and the oil pipe and plug shall be carefully cleaned and deburred. Turn the steering wheel to the straight ahead position. Clean the mounting bracket of the steering gear and relevant mating surfaces of the steering gear. For the adjustable steering column, use a suitable rope to pass through the space of the cross fork of the steering shaft, hang the steering shaft, and connect the steering shaft and the input shaft of the steering gear.

Turn the steering gear to the middle position to align the relevant marks at the input end and output end of the steering gear. Install the steering gear on the mounting base and tighten the fixing bolts. Universal joint or coupling between mounting column and steering gear. For the adjustable steering column, the upper end seal of the steering gear shall not be damaged when the universal joint is installed. Keep the steering wheel in straight ahead position.

Put the pitman arm on the steering gear to align the two marks. Tighten the locknut according to the specified torque and rivet (anti loose pit). Steering Gear, Steering Gear Body, Steering Rack, Rack & Pinion. LTD, Mustang, Thunderbird, Continental, Mark VII, Capri.

Backed by satisfying after-sales service. Rotate quickly and normal position.

F6SZ3280BA, F4ZZ3L547A, F2DZ3280A, E5SZ3L547C E8SZ3280A. Rack replacement kit, rack and pinion, power rack parts. Power Steering Rack, Steering Rack and Pinion.

Rack and Pinion Assembly, Rack and Pinion Rack Gear. Top performance For long service life. Distance Between Mounting Holes (IN). Distance Between Mounting Holes (MM). The images shown are not the actual item and are for your reference only.

FEEDBACK IS VERY IMPORTANT TO US. It is impossible to address issues if we do not know about them! OR, you may choose to have a replacement. The note there will NOT be read.

Power Heated For 07-14 Chevy GMC Clearance Signal Light Tow Side Mirrors Pair. Brake Calipers & Rotors Pads.

Cab marker Roof Running light. UTV & ATV Brake System Parts. Leveling kit + struts shocks. 4 pcs wheel hub bearing. Splash Guards & Mud Flaps. Nerf Bars & Running Boards. C Notch & Flip Kit. 4PCS Chrome Door Handle For 07-13 Chevy Tahoe GMC Yukon Sierra Denali Front Rear. For Ford F-150 Expedition 2009 2008 2007 2006 2005 2004 2003 2002 Ignition Coil.

2 Remote Car Key Fob for Ford Mustang Focus 2003 2004 2005 2006 2007 2008 2009.