Power Steering Rack and Pinion For 1995-2004 Toyota 4Runner Tacoma 4WD Assembly

  

Steering gear, also called steering gear, is the most important part of automobile steering system. Power steering (PAS) or steering assist system helps drivers steer by augmenting steering effort of the steering wheel. Power steering rack and pinion is the most important part for vehicle swerving and security assurance. It converts the rotational motion of the steering wheel into the linear motion needed to turn the wheels and provides a gear reduction, thus making it easier to turn the wheels.

The steering rack solves abnormal noise and oil leakage problems, ensures that the steering wheel rotation angle is proportional to the tire rotation angle, and reduces the steering wheel's control force when turning, which makes driving safer. There are two functions this power steering rack and pinion unit can provide. Firstly, it is able to convert the rotational motion of the steering wheel into the linear motion needed to turn the wheels. Secondly, this unit could make a gear reduction, thus making it easier to turn the wheels. This vehicle steering rack pinion is made of sturdy steel and aluminum alloy with anti-wear and scratch-proof quality.

We put moderate lubricating oil into this assembly so that it can prevent rust and oxidation. Surface Finish: Polished, Rust Protected. 1996 - 2002 Toyota 4Runner All Models. 1995 - 1997 Toyota Tacoma 4WD All Models. 1998 - 2004 Toyota Tacoma 4WD and 2.7, 3.4 Liters.

1998 - 2004 Toyota Tacoma 2WD and 2.7 Liters. 1998 - 2004 Toyota Tacoma 2WD and 3.4 Liters and Pre-runner.

In order to ensure the normal operation of the steering gear, relevant parts shall be cleaned as much as possible before installation. With the exemption of U. If your item is faulty or was incorrect, please contact our sales representative before returning the parcel and we will endeavor to solve the problem effectively. We always recommend cross referencing a part number to ensure fitment as well.