Power Steering Rack & Pinion Assembly For Toyota Rav4 44200-42120 2001 2002 2003

  

Size: 122x24.5x14.5(cm). Input Shaft Diameter(in): 0.68in. Input Shaft Length(in): 1.53in. Pressure Port Thread Size: M161.5.

Return Port Thread Size: M171.5. Number of Mounting Holes: 2.

Distance Between Mounting Holes (in): in. Rack Length (in): 45.31in. Built to strict quality control standards 100% factory tested. The steering rack solves abnormal noise and oil leakage problems, ensures that the steering wheel rotation angle is proportional to the tire rotation angle, and reduces the steering wheel's control force when turning, which makes driving safer.

Conversion of the steering wheel's rotationalmotion into the linear motion needed for thevehicle's wheels to turn. Reduction of gears, which makes it easierfor the steering wheel to turn the wheels.

With the premium aluminum alloy and steel construction, this steering rack assembly has a great anti-rust and anti-corrosive quality for its long service life. We put moderate lubricating oil into this assembly so that it can prevent rust and oxidation. Ensure a tight seal and smooth steering operation. The hydraulic lines are fully fluid tested at high pressure.

And the steel clamps and rubber bellow boots improve steering efficiency. 1PC Power Steering Rack and Pinion. Correctly select the model and size of the steering gear: The model and size of the steering gear must be consistent with the original parts of the vehicle, otherwise it will affect the steering sensitivity and stability. Clean the surrounding area first: Before replacing the steering gear, it is necessary to thoroughly clean the surrounding area to prevent small debris residues from damaging new steering gear components. Correct disassembly and assembly of the steering gear: When disassembling an old steering gear, be particularly careful to avoid damaging the original vehicle components, and lubricate the bearings and gears during installation. Use of high-quality steering oil: For hydraulic power assisted steering machines, high-quality steering oil is required. Correctly adjust the wheel angle: After replacing the steering gear, it is necessary to adjust the wheel angle to ensure vehicle stability and safety.

Attention to maintenance: Regularly inspect and maintain steering gear components to ensure good operation of the steering gear. Oil leakage: The oil seal in the steering gear can break due to aging and wear, resulting in loss or leakage of hydraulic oil. Oil leakage can cause difficulty or malfunction in steering operation. Abnormal noise: A snap, noise, or hiss may be caused by worn steering gear, pin shaft, or rack.

Excessive steering force: Blockage or wear of the steering gear oil pipes or passages can cause excessive hydraulic oil pressure, excessive steering force, or even steering failure. Steering failure: Steering failure can be caused by reasons such as damage to the steering gear, blockage in the oil circuit, and failure of the oil pump, which will affect driving safety. Shake or shake: Worn or loose parts in the steering gear can easily cause the vehicle to shake or shake during steering. Dead center: When turning, if the steering wheel needs to be rotated for a long time until the vehicle turns significantly, this may be a dead center problem with the steering gear. YOUR TOP EXCAVATOR PARTS SPECIALIST.

SINOCMP® is one of the largest professional suppliers of excavator parts in China. We mainly offer aftermarket replacement parts with our brand SINOCMP. Our advantageous products include controllers, monitors, motor ass'y, solenoid valves, sensors, switches, main valves, water pumps, air compressors, liner kits, gasket kits, cooling parts, seal kits etc. Besides, we deal with excavator diagnostic tool and excavator service. And we offer repair service for controllers and monitors!

The products are blessed with very good quality, competitive price and good after sale service. With many years endeavor and experience, our products are exported to many countries of the Middle East, Europe, America, Africa and Asia. And we have established long-term stable and good business relationships with many customers around the world.

Full name, correct telephone number and detailed Physical Address (home or office address) but not PO Box/APO/FPO address are necessary. Please check the specification carefully to ensure you get what you want. All items are in new and working condition unless specified otherwise elsewhere in the description. If you do not wish to wait for a replacement, please repurchase the item.

We are happy to assist you! Please message us for further assistance.